How to build a 5 gallon bucket garden stand. Build a unique work of art that not only enhances your home’s exterior but produces fresh vegetables too!
There are many DIY Pinterest projects out there but if you are like me and don’t have a lot of time to produce them, then this is my version of a quick stand for your 5 gallon buckets. I am going to share with you how to build a 5 gallon bucket garden stand. This is a cute idea for using plastic buckets with handles that easily stack on top of each other and do not take up much space.
How to build a 5 gallon bucket garden stand
A 3 tier stackable 5 gallon bucket garden stand is a great addition to any vegetable garden. It’s easy to build, and the buckets can be used for other gardening needs as well.
Materials:
5 gallon buckets – 12 total (6 per level)**
3/4 inch plywood – 1 sheet cut into 4 rectangles 5×2 feet**
Wood screws**
Tools:**
This is a simple and effective way to build a 5 gallon bucket garden stand. The design has 3 tiers, so you can grow three plants at once.
The first step is to drill holes in the sides of the buckets. This will allow for drainage and for air circulation to get inside the bucket.
Next, you’re going to need to put together some legs for your stand. You can use any type of wood for this purpose, but we recommend using cedar because it’s durable and rot resistant.
The top end of the legs should be cut at an angle so that they fit snugly into the bottom ends of the buckets.
Finally, attach your leg assemblies to each other with screws or nails and then add your pots!
DIY 5 Gallon Bucket Garden Planters
If you want to grow your own herbs and vegetables, but don’t have a lot of room in your yard, you can use 5 gallon buckets as planters. These buckets are large enough to hold several plants, but they’re small enough to fit on a patio or balcony. You’ll need some basic tools and materials to build your own 5 gallon bucket garden stand.
The following instructions will show you how to build a 3-tier garden stand made from old wooden pallets.
Materials:
5 gallon buckets (12)
3-4 wooden pallets (you can find these at your local hardware store)
Hot glue gun or wood glue
Tape measurer/ruler
Sandpaper (optional)
Here’s how to make a 5 gallon bucket garden stand. This stand is made from 5 gallon buckets, but you can also use 2 1/2 or 3 gallon buckets.
This project is easy and inexpensive, and it’ll take less than an hour to build. The stand is strong enough to hold the weight of your plants, but not so strong that it can’t be moved by one person.
Here are some tips for building your own 5 gallon bucket garden stand:
Use untreated wood for this project. Treated wood will not last as long outdoors as untreated wood will.
You can use any type of wood that’s available in your area, but pressure-treated pine works well because it’s inexpensive and easy to work with.
The size of the wood pieces depends on how big you want your stand to be. If you’re using larger palm trees or other large plants, make sure that the base of all three tiers is at least 12 inches square (30 cm).
This is a great way to garden in small spaces. It is easy to construct and will make it easy for you to plant, water, and harvest your plants. This plan can be used for 5 gallon buckets or larger containers. The plan uses 12 5 gallon buckets but if you want more height then you can use fewer buckets.
The first step is to get the materials together that you need to build your stand. These include:
12 – 5 Gallon Buckets
15 – 2x4s
1 – 16′ 2×4
1 – 8′ 2×4
2 – 1/2″ Lumber Screws
Wood Glue
Drill & Drill Bit
Circular Saw or Table Saw
Miter Saw or Skill Saw (optional)***ENDWRITE
12 bucket garden stand plans – The first step to building a 12 bucket garden stand is to cut the bottom out of one of the buckets. This will be the main support for your structure. You can do this with an electric drill and a jigsaw, or if you’re feeling adventurous you can use a hand saw.
12 5 gallon bucket garden stand – Next cut two pieces of wood that are both 2 feet long and 1 foot wide. These will be used as supports for the side walls of your stackable planter boxes. Sand down any rough edges on all four pieces so they’ll fit together nicely when you’re done building them. You also want to make sure that they’re all at right angles because later on we’ll be connecting them together with screws or nails so everything lines up perfectly.
bucket garden plans – Now it’s time to assemble your 12 bucket garden stand! Start by placing one side piece against one end of the bottom piece, then screw it into place with some deck screws (2 per hole). Repeat this process on the other side of your base piece so that there are two sides attached to each other on each end.
12 bucket garden stand – Now you’re ready for step three! Simply stack
Bucket garden stands are a great way to add some extra storage space in your home and they look great!
When it comes to gardening, you can never have too many buckets. You need them for watering tools and seedlings. Plus, they make great planters. But when you need more than one bucket at a time, what do you do?
Here are 12 different designs for bucket stands that will help you get organized and keep your buckets organized.
The three tier stand is made from 1/2″ plywood with legs made from 2×4s and 2x6s. The three tiers are also removable if you don’t need them all at once.
This 12-5 gallon bucket stand is made from cedar boards and has a stained finish. It also has a back panel so the buckets don’t have to be stored directly on the floor of your garage or shed (or wherever else you choose to store them).
This stand is made from cedar boards with metal braces and legs for stability. It also has a back panel so the buckets don’t have to be stored directly on the floor of your garage or shed (or wherever else you choose to store them).
This stand is similar in design to the
12 bucket garden stand. This is a great way to make a garden stand that can be customized to fit any size or shape of bucket.
You will need:
12 five gallon buckets (or any size bucket)
4×4 posts cut to the height you want your garden stand to be
2×4’s cut to length for the legs, plus a few inches for the cross bars and end cap pieces
3/4 inch plywood cut into 2×2 or 2×3 strips depending on whether you want the legs on one side or both sides. If you want both sides, then cut an additional piece of plywood for the top shelf. I used 1×6’s for my shelves because they were already in my garage when I was building this project.
Drill bit that matches the size of your screws; I used 1-1/2″ flat head screws with washers on each bolt. You also need some drywall anchors if your wood isn’t treated or pressure treated, but mine was so I didn’t need them.
The 12 bucket garden stand is the perfect way to add a little bit of whimsy to your garden. If you have a small space, this is going to make it look bigger. You can also use this as a centerpiece for your party. You are going to love how easy it is to make one of these at home. All you need is a few buckets and some paint.
It’s also important that you know where you want to put your stand before starting. That way, you can make sure that everything fits properly and looks good together when it comes time to hang it up on the wall.
We have created an entire video on how to make this project in just under 10 minutes! It will show you step by step with no tools required!
If there is enough interest, we will be creating more videos like this one so check back often!
This three-tier garden stand is made from 5-gallon buckets, so it’s lightweight and easy to move around.
The buckets are attached to each other with a few simple cuts and screws. The buckets are also cut down in size so they have a flat bottom, which makes them easier to stack on top of each other.
You can use this garden stand for vegetables or flowers, or you can even use it as a way to store items in your garage or shed.
